Home > Sale >

Joye eVic-VTC Mini - Starter Kit - Black
Joye eVic-VTC Mini - Starter Kit - Black

Alternative Views:

Price: $34.95

Stock Status:(Out of Stock)
Availability:: Usually Ships in 24 to 72 Hours


Joye eVic-VTC Mini 60W 18650 Temperature Control Mod - Starter Kit

Joyetech has stepped up their game and released the updated version of the eVic-VT called the eVic-VTC Mini. The eVic-VTC Mini is more compact and a true delight to carry around. The eVic-VTC Mini has the same power as its predecessor with its cutting edge temperature control capabilities. The eVic-VTC Mini can fire up to 60 watts which makes it perfect for those who like to chase clouds, or those who prefer chasing the perfect flavor!

The Joye eVic-VTC requires (1) removable high amp 18650 battery (Sold Separately). The convenient magnetic battery makes battery swaps a breeze. Its streamlined design and colors make this temperature control mod a real eye catcher that will stand out in a crowd.

The eVic-VTC Mini features an OLED display to clearly display all the information, and supports VT-Ti (Titanium), VT-Ni (Nickel), VW Mode, and By-Pass Mode.

The Variable Temperature (VT) system provides almost a perfect vape through its temp control system, while at the same time reducing e-liquid consumption. The other stand out part is improved battery life in temperature control mode. When vaping the wattage will reach its maximum in next to no time while the device maintains the desired temperature while using as little power as required. The Variable Temperature system allows for the use of Nickel Titanium or Kanthal wire.

In Variable Wattage (VW) mode the output wattage can be adjusted from 1 to 60 watts by using the adjustment buttons located under the display. Holding in the desired up or down button will make the wattage setting rapidly increase.

In the new Bypass mode, the eVic-VTC Mini will output the direct battery voltage. Resistance must be in the range of 0.15 to 3.5ohm to work in Bypass mode.

The eGo One Mega VT tank has a large 4ml liquid capacity and is perfectly matched to the eVic-VTC. The eGo ONE Mega VT comes with two types of coils, Ti (Titanium) and Ni 200 (Nickel) for the respective VT-Ti (Titanium) and VT-Ni (Nickel) modes. The metal driptip is thermally insulated and designed for an easy and comfortable vape. The AFC allows users to adjust the airflow to their own preference as well.

Features & Specs :
  • Dimensions : 3 1/4"L x 1 1/2"W x 7/8"D (Body Only)
  • Requires 1 x 18650 High amp battery (Sold Separately)
  • Removable Magnetic Battery Cover
  • 510 Threaded
  • Output Mode : VT-Ni, VT-Ti, VW, and Bypass Modes
  • New Bypass Mode
  • Temperature Range : 100-315C / 200-600F
  • Operating Wattage : 1 to 60 Watts
  • Output Voltage : 0.5V to 8.0V
  • Resistance Range : 0.05 - 1.0ohm for VT Mode
  • Resistance Range : 0.15 -3.5ohm for VW/Bypass Modes
  • Firmware Upgradeable
  • Micro USB Charging Port
  • 4ml Liquid Capacity
  • 510 Drip tip Compatible
  • Display : VT-Ti, VT-Ni, VW, Bypass Modes Wattage / Voltage Atomizer Resistance Puff counter, Battery Power, Time

Package Contents :
  • 1 x eVic-VTC Mini
  • 1 x eGo ONE Mega Tank
  • 1 x eGo ONE CL-Ni 0.2ohm Head (Pre-installed)
  • 1 x eGo ONE CL-Ti 0.4ohm Head
  • 1 x Drip Tip
  • 1 x AC Wall to USB Adaptor
  • 1 X Micro USB Cable

***Temperature Control requires the use of Nickel or Titanium Coils***

Sold Individually

30 day Limited Warranty against manufacturer defects. Scratches, Discoloration of the finish is considered normal wear & tear is not covered by warranty.

Please note this item can use subohm coils, and subohm builds. It will only work when using such resistances on a mechanical mod, or variable wattage mod capable of firing a resistance of 0.15ohm.
Before using you need to make sure you mod/ and or batteries can handle the resistance load. Always make sure to consult ohms law, and other important materials to ensure a safe & fun vaping experience!
***The use of Nickel Ni200 or Titanium Ti coils should only be used on devices equipped with circuit boards capable of temperature control. The use of these coils on any other device could result in an explosion.***
LiteCigUSA will not be held liable for any personal injury and/or damage caused to unit it is used on.
LiteCigUSA will not be held liable for any personal injury and/or damage temporary or permanent caused from the use of this product.

  0 of 0 people found the following review helpful:
Excellent Mod June 19, 2016
Reviewer: fucitol from Eighty Four, PA United States  
Beautiful mod and built very well. The eGo One tank works like a charm. I don't sub-ohm but prefer mods with replacable batteries because they're more economical and the Joyetech CLR heads will allow me to build at higher resistance. Litecig was the only U.S vendor that had this kit in stock and at a very reasonable price.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
best mod December 11, 2015
Reviewer: Mark N from Tempe, AZ United States  
This is by far the best mod I have ever owned. The temp control coils work great, and are not too expensive. The tank included is a perfect fit and is big enough that its easy to refill and clean. The button is sturdy and feels like it will last a long time. The display screen is easy to read and relatively easy to navigate the controls.
I would highly recommend this for any level vape user as it is affordable and a great mod

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Excelent little kit November 23, 2015
Reviewer: John Anderson from Pasadena, TX United States  
Got this set-up and couldn't be happier. Not only is it nice & small, smooth,  has no rough edges and the battery door magnets are good and strong. The screen is easily readable  and commands are easy to navigate.  The firmware upgrade option is a great it took all of 2 minutes at Joyetec to dl it. Imho though, I'd recommend NOT going all the way to the 2.0.  It kind of messes up the display by adding the battery , puff counter and timer and in the process, it decreases the size of stript  that lists your resistance and amps.  I think the 1.2  or  1.3 update are the right ones to get the boost to 75 Watts and the ability to read/use SS wire but still allow the use of the cleaner looking  oled set-up.  It  came with 2 TC heads ( Ti & Ni ) also.  If I HAD to find something to gripe about, It would probably be that they don't include any of the CLR  heads with the set. Aside from that, this is still one of the best little sets out there currently and for a really reasonable price too.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
awesome clouds November 13, 2015
Reviewer: Dale from Dixon, IL United States  
works well no dry hits and clouds of vapor,and like always fast shipping from litecig

Was this review helpful to you?

Browse for more products in the same category as this item:

Sale > Sale Hardware
Mods & RDA's
Mods & RDA's > Box Mods
Mods & RDA's > Temperature Control