Home > Sale >

Joye Cuboid 200 TC Mod
Joye Cuboid 200 TC Mod

Alternative Views:

Joyetech Cuboid 200 Watt Triple 18650 Temp Control Upgradeable Firmware Mod
Price: $36.95

Availability:: Usually Ships in 24 to 48 Hours
Product Code: JOYE-CUBOID-200

Color Choice
Click to view another  Color Choice

 Color Choice*:

In Stock Choose Color


Joye Cuboid 200 Triple 18650 Temp Control Mod

The Joye Cuboid 200 TC Mod is the new and improved version of the original Cuboid Mod. The Cuboid 200 now has increased wattage output, and a newly added preheat functionality all inside its redesigned, slim an trim design. The Joyetech Cuboid 200 require (3) High Amp 18650 batteries to power the device. (Batteries are sold separately) The Cuboid 200 from Joyetech uses a Variable Temperature Control system, with firmware V6.04 already installed which supports Nickel, Titanium, Stainless Steel 316 in TC Mode and a customized TCR mode available.

The Joye Cuboid 200 features stainless steel 510 threading, and a wide border design to accommodate larger tank sizes. The Joyetech Cuboid 200 is powered by three replaceable and removable 18650 batteries. (Sold Separately) The triple 18650 batteries are easily swapped with the newly redesigned battery door. The Cuboid comes with a very nice 0.96" OLED display with custom logo functionality. The built-in Micro USB Port is used for upgrading to future new firmwares, which will ensure your mod is always up to date on the newest features and functions.

***It is strongly recommended to only use an external charger for the batteries. We do not recommend using the USB port for charging at all.***
    Features & Specs :
    • Dimensions : 3 7/8" x 1 5/8" x 1 1/8"
    • Stainless Steel 510 Threading
    • Output Wattage : 1 - 200W
    • Temperature Control : Nickel, Titanium, 316 Stainless Steel & TCR Mode
    • Temperature Control Range : 200 - 600F
    • Resistance Range for Variable Temperature Mode : 0.05 - 1.5ohm
    • Resistance Range for Variable Wattage Mode : 0.1 - 3.5ohm
    • Preheat Function
    • Upgradeable Firmware
    • 0.96" OLED Display
    • Custom Logo Capable
    • Zinc Alloy Construction
    • Requires 3 x 18650 High Amp Batteries (Sold Separately)
    • Slip Open Battery Cover for Easy Battery Swaps
    • Micro USB Port for Firmware Upgrades
    • Reverse Polarity Protection
    ***External charger is suggested for optimal charging of batteries.***

    ***Temperature Control requires the use of Nickel, Titanium or Stainless Steel Wires/Coils.***

    Package Contents :
    • 1 x Joye Cuboid 200 Temperature Control Mod
    • 1 x Micro USB Cable
    • 1 x Silicone Sleeve
    • 1 x User Manual
    Sold Individually

    30 day limited warranty against manufacturer defects. Scratches and discoloration to the finish, normal wear & tear, accidental damage etc... is not covered by warranty.

    ***The use of Nickel Ni200 or Titanium Ti coils should only be used on devices equipped with circuit boards capable of temperature control. The use of these coils on any other device could result in an explosion.***

    This device should only be used with Lithium Ion IMR Batteries with an amp limit of 20A and higher. Using any other battery can be potentially dangerous.
    Use special caution when working with any Li-ion cells as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the end user is very knowledgable of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended.
    We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.
    LiteCigUSA will not be held liable for any personal injury and/or damage temporary or permanent caused from the use of this product.

    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Sale > Sale Hardware
    New Arrivals
    Mods & RDA's > Variable Mods
    Mods & RDA's > Temperature Control