Joye Cuboid 150W Dual 18650 Temp Control Mod
The Cuboid from Joyetech is an incredibly small dual 18650 Temp Control Mod. The Joyetech Cuboid uses the Variable Temperature Control System with the V3.0 firmware pre-installed with 150 Watt output and compatibility for Nickel, Titanium and 316 Stainless Steel in TC Mode. They have also added a Customizable TCR for the TC mode as well.
The Joye Cuboid features stainless steel 510 threading, and a wide border design to accommodate larger tank sizes. The Joyetech Cuboid is powered by two replaceable and removable 18650 batteries. (Sold Separately) The dual 18650 batteries are easily swapped with the new slip-open battery door. With the Cuboid comes a very nice 0.96" OLED display, multiple color options, and the all new dual battery bar display. The upgradeable firmware ensures your Cuboid is always update to date.
The Cuboid from Joyetech allows you to now adjust TCR values for different materials, which further improves on the accuracy of the built-in temperature control. There are three available options for the TCR mode (M1, M2, M3). In the power-off state, press the fire and right button simultaneously for 5 seconds to enter the TCR setup menu.
Firmware 3.10 for the Joyetech Cuboid is now available and allows you to upgrade to 200W.
Features & Specs :
***External charger is suggested for optimal charging of batteries.***
- Dimensions : 3 5/8" x 1 5/8" x 1 1/8"
- Stainless Steel 510 Threading
- Output Wattage : 1 - 150W
- Temperature Control : Nickel, Titanium, 316 Stainless Steel & TCR Mode
- Temperature Control Range : 200 - 600F
- Resistance Range for Variable Temperature Mode : 0.05 - 1.5ohm
- Resistance Range for Variable Wattage Mode : 0.1 - 3.5ohm
- Upgradeable Firmware
- 0.96" OLED Display
- Dual Battery Display Bar
- Requires 2 x 18650 High Amp Batteries (Sold Separately)
- Slip Open Battery Cover for Easy Battery Swaps
- Micro USB Port for Charging and Firmware Upgrades
- Reverse Polarity Protection
***Temperature Control requires the use of Nickel, Titanium or Stainless Steel Wires/Coils.***
Package Contents :
- 1 x Joye Cuboid 150W Temperature Control Mod
- 1 x Micro USB Cable
- 1 x User Manual
30 day limited warranty against manufacturer defects. Scratches and discoloration to the finish, normal wear & tear, accidental damage etc... is not covered by warranty.
***The use of Nickel Ni200 or Titanium Ti coils should only be used on devices equipped with circuit boards capable of temperature control. The use of these coils on any other device could result in an explosion.***
This device should only be used with Lithium Ion IMR Batteries with an amp limit of 20A and higher. Using any other battery can be potentially dangerous.
Use special caution when working with any Li-ion cells as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the end user is very knowledgable of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended.
We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.
LiteCigUSA will not be held liable for any personal injury and/or damage temporary or permanent caused from the use of this product.