Innokin Itaste MVP 3.0
The iTaste MVP 3.0 is the newest in the line of MVP series from Innokin. Known for their rock solid durability, and feature packed units the MVP has been a top seller for years. The MVP 3 packs even more features and safeties into a smaller form factor!
Designed and upgraded based on suggestions from vapers, reviewers. The iTaste MVP3 is more powerful then ever with a maximum output of 30 Watts and the ability to fire a wide range of coils from 0.4 to 2.5 ohm.
Made from only the highest quality materials the iTaste MVP3.0 is designed to be reliable yet powerful everyday vape. A flush 510 thread connection with a spring loaded and gold plated positive pin, durable stainless steel threading and an included eGo thread adaptor enhance performance and compatibility.
Large OLED screen clearly displays all the important information including coil resistance (ohms), wattage & voltage, and battery status. The two button interface makes it easy and quick to find and set the precise power output to give you the perfect vape! Pushing the two buttons simultaneously displays the secondary display with ohm meter, battery level indicator, and puff counter.
The internal 3800mah battery can be used to charge your electronic devices via the integrated, and replaceable Micro USB charging cable or USB port.
With the MVP V3.0 you never need to wait to vape as it will act as a pass-through when plugged into the Micro USB Charging port on the side. Advanced safety features like 15 second firing cutoff, low voltage warning, atomizer short and over discharge protection allows you enjoy a safe vape with confidence.
The iTaste MVP3.0 has a variable voltage range of 3.0 -9.0 volts. These are adjustable in 0.1 volt increment. The wattage output range of 6.0 to 30.0 Watts, is adjustable in 0.5 watt increments. Use of vRMS DC current is very accurate with a power deviation of only 0.1 Watt. The full 30 Watt ouptu is precisely maintained between the resistances of 0.4 - 2.5 ohm. There is no wasted power, and the accuracy means you are always vaping at the power level you choose. vRMS provides superior precision in delivering the exact wattage Ohm's Law requires, and stable power means a better vaping experience!
Features & Specs :
- Dimensions : 4" x 1-3/4" x 7/8"
- Battery Level Indicator :Integrated tri-color LED located on top of the battery. Green = Almost fully charged. When the MVP 3 is fully charged the top LED will power off. Yellow = Half Power. Red = Low Power. Charge the MVP3.
- Variable Voltage : Voltage can be adjusted from 3.0 to 9.0v in 0.1v increments.
- Variable Wattage : Wattage can be adjusted from 6.0 to 30.0W in 0.5W increments.
- Low Voltage Warning : The Red LED and Battery bar will continue to blink when the battery capacity is lower then 3.3v and the MVP3.0 will automatically power off.
- Short Circuit Protection : Protects the iTaste MVP3 Advanced Personal Vaporized against shorted atomizers and will stop the unit from functioning in unsafe conditions.
- Pass-through : While charging through the Micro USB cable, the MVP3.0 can be used as a pass-through so you can charge & vape!
- Settings retention : The the iTaste MVP3.0 is turned off it will remember the current voltage or wattage setting and will retain the setting when the MVP3 is powered on.
- Portable power source : Ability to charger your personal electronics with the built-in Micro USB cable. You can also use the USB port to power devices that do not use a Micro USB charging cable. Simply plug your device into the MVP 3 using one of those ports, turn on the MVP3.0 and it will begin charging the attached device. It is only capable of charging once device at a time.
- 510 Connection : Compatible with all 510 threaded atomizers, tanks an clearomizers. Using the included eGo adaptor allows the use of eGo threaded clearomizers & tanks.
Technical Specs :
- Operating Voltage : 3.0 - 9.0v
- Operating Wattage : 6.0 - 30.0w
- Built in 3800mah Battery
- Standby Current : 100uA max
- Maximum output Wattage : 30w
- Maximum output Current : 10A
- Maximum output Voltage : 9v
- 0.4ohm minimum resistance
- Charging : Micro USB DC 5V/1A
- Output Port : DC 5V/1A
Package Contents :
- 1 x Innokin iTaste MVP 3.0
- 1 x USB Charging Cable
- 1 x eGo thread adaptor
- 1 x User Manual
30 day warranty against manufacturer defect. Scratches, chipping, discoloration or fading of the finish from normal use is not covered under warranty.
Independent review by Pbusardo