Home > Sale >

Eleaf iStick TC 200W - Grey
Eleaf iStick TC 200W - Grey

Alternative Views:

Eleaf iSmoka iStick 200W Temperature Control Box Mod - Grey
Price: $36.95

Stock Status:(Out of Stock)
Availability:: Usually Ships in 24 to 48 Hours
Product Code: ELEAF-ISTICK200-GREY


Eleaf iStick TC 200W Box Mod

Eleaf the innovators of the acclaimed iStick brings the next best thing with the iStick TC 200W Box Mod. Just like the Wismec RX200 Mod, the powerful iStick 200 requires (3) high Amp 18650 Batteries (Sold Separately) to fully power the iStick TC 200W. The Eleaf iStick TC 200W mod has a max output of 200 watts, and also supports Nickel, Titanium, Stainless Steel coils and TCR in Temperature Control mode. The innovative shape of the iStick TC200W fits perfectly in the hand, and the metallic finish is a visual treat. The Eleaf iStick 200 TC Box Mod utilizes an innovative flip-open battery cover for quick an painless battery swaps. The high wattage output, multiple built-in protection features and upgradable firmware, means the iStick 200W TC mod from Eleaf will be around for a long time providing a truly hard hitting vape experience.

Features & Specs :
  • Dimensions : 3 1/4" x 2 1/4" x 1 1/2"
  • Stainless Steel 510 Threading
  • Spring Loaded Contact Pin
  • Variable Wattage Range : 1.0 - 200.0W
  • Temperature Range : 200 - 600F
  • Temperature Control Modes : Nickel (Ni200), Titanium (Ti), Stainless Steel (SS316), and TCR
  • Resistance Range Wattage Mode : 0.1 - 3.5ohm
  • Resistance Tange TC Mode : 0.05 - 1.5ohm
  • Requires (3) High Amp 18650 Batteries (Sold Separately)
  • OLED Display
  • Flip Open Battery Door
  • Micro USB Port (We recommend the use of an external charger for charging batteries!)
  • Upgradable Firmware
  • Stealth Function
  • No Atomizer Protection
  • Dual Circuit Protection
  • Atomizer Short Circuit Protection
  • Low Resistance Warning
  • Low Voltage Protection
  • Temperature Protection
  • Temperature Warning
  • Weak Battery Warning
  • Imbalanced Cell Warning
  • Check Battery Warning
  • Charging Error Warning
  • Check USB Warning
***Temperature Control requires the use of Nickel, Titanium, or Stainless Steel Coils.***

***This device requires (3) High Amp 18650 Batteries (Sold Separately). All (3) batteries must be of the same brand and model. All (3) batteries should be discharged and recharged together. An external charger is highly recommended for charging.***

Package Contents :
  • 1 x Eleaf iStick 200 Watt TC Box Mod
  • 1 x USB Cable
  • 1 x Instruction Manual
Sold Individually

Check out our stock of Premium e-Liquid as well!!

30 day limited warranty against manufacturer defects. Scratches and discoloration to the finish, normal wear & tear, accidental damage etc... is not covered by warranty.

***The use of Nickel Ni200 or Titanium Ti coils should only be used on devices equipped with circuit boards capable of temperature control. The use of these coils on any other device could result in an explosion.***
This device should only be used with Lithium Ion IMR Batteries with an amp limit of 20A and higher. Using any other battery can be potentially dangerous.
Use special caution when working with any Li-ion cells as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the end user is very knowledgable of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended.
We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.
LiteCigUSA will not be held liable for any personal injury and/or damage temporary or permanent caused from the use of this product.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Sale > Sale Hardware
Mods & RDA's
Mods & RDA's > Box Mods
Mods & RDA's > Temperature Control