Eleaf iPower 5000mah 80W Temp Control Mod
The Eleaf iPower is powered by a 5000mah built-in battery designed to last most vapers all day. The Eleaf iPower features a smooth, and sleek finish which is extremely comfortable to hold and very aesthetically pleasing. For everything that is packed into the Eleaf iPower it is still very minimalist in size. With a maximum output of 80 watts the iPower is a very capable vaping mod. The Variable Temperature Control system offers compatibility with Nickel (Ni), Titanium (Ti), and Stainless Steel (SS316L) coils and atomizer heads. The iPower from Eleaf also features bypass, Smart and Temperature Coefficient of Resistance (TCR) modes for unmatched versatility. The built-in dual circuit protection protects against over charging, over current, and over discharge. The built-in Micro USB port allows for easy charging of the internal 5000mah battery, and also allows for the download of future firmware updates.
Features & Specs:
***Temperature Control requires the use of Nickel, Titanium or Stainless Steel Coils or Atomizer Heads.***
- Built-in 5000mah Battery
- Wattage Output : 1.0 - 80.0W
- Dimensions : 3 1/4" x 1 7/8" x 7/8"
- Variable Temperature Control Modes : Nickel, Titanium, Stainless Steel, and TCR
- Bypass (Direct Output Voltage) and Smart Modes
- Temperature Control Range : 200 - 600F
- Resistance Range : 0.05 - 1.5ohm for Variable Temperature Control Mode
- Resistance Range : 0.1 - 3.50ohm for Variable Wattage & Bypass Modes
- Bottom Ventilation Holes
- Micro USB Port
- Reset Button
- OLED Display Screen
- Dual Circuit Protection
- Over Charge Protection
- Over Discharge Protection
- Over Current Protection
- Upgradeable Firmware
Package Contents :
- 1 x Eleaf iPower 80w Temperature Control Mod
- 1 x Micro USB Cable
30 day limited warranty against manufacturer defects. Scratches and discoloration to the finish, normal wear & tear, accidental damage etc... is not covered by warranty.
***The use of Nickel Ni200 or Titanium Ti coils should only be used on devices equipped with circuit boards capable of temperature control. The use of these coils on any other device could result in an explosion.***
This device should only be used with Lithium Ion IMR Batteries with an amp limit of 20A and higher. Using any other battery can be potentially dangerous.
Use special caution when working with any Li-ion cells as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the end user is very knowledgable of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended.
We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.
LiteCigUSA will not be held liable for any personal injury and/or damage temporary or permanent caused from the use of this product.
Check out our entire line of Premium e-Liquids