Eleaf Aster 75W TC Mod
The Eleaf Aster was crafted with ergonomics in mind. The sleek lines, and design of the Aster Mod allows it to comfortably fit in the palm of your hand. The metallic finish adds to the stunning appearance of the Eleaf Aster. The Aster with it's large OLED display to easy to see, and the conveniently placed firing button makes using it a breeze. The Aster is capable of 75 Watts of output to provide more then ample vapor production, but it also comes with intelligent temperature control supporting Nickel (Ni200), Titanium (Ti), and Stainless Steel 316 (SS316) coils. The Eleaf Aster also features TCR (Temperature Coefficient of Resistance) and built-in Bypass mode.
The Eleaf Aster is powered by (1) High Amp 18650 (Sold Separately). The battery is easily swapped out through the magnetic battery door. The built-in Micro USB Port can be used to charge the 18650 battery, and also for the updating of future firmware releases.
Features & Specs :
***Temperature Control requires the use of Nickel, Titanium or Stainless Steel Coils.***
- 510 Threaded
- Spring Loaded Positive Connection
- Dimensions : 3 9/16" x 1 3/8" x 7/8"
- Output Wattage : 1.0 - 75.0W
- Temperature Control Modes : Nickel, Titanium, Stainless Steel & TCR
- Temperature Control Range : 200 - 600F
- Bypass Mode
- OLED Display Screen
- Operating Resistance : 0.1 - 3.5ohm in Variable Wattage/Bypass Modes
- Operating Resistance : 0.05 - 1.5ohm In Temperature Control Modes
- Requires (1) High Amp 18650 Battery ( Sold Separately)
- Magnetic Battery Door
- Sleek, Ergonomic Design
- Micro USB Port for Charging & Firmware Updates
- Upgradeable Firmware
- Custom Logo Capable
- Reverse Polarity Protection
- Dual Circuit Protection
Package Contents :
- 1 x Eleaf Aster
- 1 x Micro USB Cable
30 day limited warranty against manufacturer defects. Scratches and discoloration to the finish, normal wear & tear, accidental damage etc... is not covered by warranty.
***The use of Nickel Ni200 or Titanium Ti coils should only be used on devices equipped with circuit boards capable of temperature control. The use of these coils on any other device could result in an explosion.***
This device should only be used with Lithium Ion IMR Batteries with an amp limit of 20A and higher. Using any other battery can be potentially dangerous.
Use special caution when working with any Li-ion cells as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the end user is very knowledgable of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended.
We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.