Home > Mods & RDA's >

  Eleaf iStick Pico 75W TC Kit - Silver

Alternative Views:

Eleaf iStick Pico 75W TC w/ Melo 3 Mini Tank - Silver
Price: $39.95

Stock Status: In Stock
Availability:: Usually Ships in 24 to 48 Hours


Eleaf iStick Pico 75 Watt TC Starter Kit

The Eleaf iStick Pico Starter Kit comes with the Pico Mod and the Melo 3 Mini Tank. The iStick Pico stands for Preferable, Innovative, Compact and Outstanding (Pico). The Eleaf Pico 75W TC Kit offers a tremendous vaping experience in a compact and convenient size. The Eleaf Pico 75W not only delivers a satisfying amount of vapor it also has a maximum output of 75 Watts, and it also features smart temperature control sensing technology which supports Nickel (Ni200), Titanium (Ti), and 316 Stainless Steel (SS316) Coils. The Eleaf Pico 75W TC Kit also features Bypass and Temperature Coefficient of Resistance (TCR) Modes.

The iStick Pico has the ability to easily switch out batteries, while still being able to fit nicely in the palm of your hand. The iStick Pico requires (1) High Amp 18650 Battery (Sold Separately) that is easily replaceable with the conveniently located battery cap. The iStick Pico can be charged through the built-in Micro USB Port. Future Firmware upgrades can be installed through the USB port as well.

The Eleaf Melo 3 Mini is the perfect tank for the Pico. With its compact size and 2ml e-Liquid capacity the Melo 3 Mini Tank looks as well as it performs. Due to the topfill feature the Melo 3 Mini Tank is super easy to fill and refill. The Melo 3 Mini features an integrated invisible airflow control for excellent vapor production and customization. The Eleaf Melo 3 Mini is made from Stainless Steel and features a glass tank. Compatible with the Eleaf EC Series of Atomizer Heads. When paired with the Eleaf Pico, the Melo 3 Mini Tank produces an amazing vaping experience.

Melo 3 Mini Replacement Atomizer Heads :

iStick Pico 75W Features & Specs :
  • Dimensions : 2 3/4" x 1 3/4" x 7/8" (Without Melo 3 Mini)
  • 510 Threaded
  • Requires (1) High Amp 18650 Battery (Sold Separately)
  • Output Wattage : 1 - 75.0W
  • Bypass Mode
  • Temperature Control : Nickel (Ni200), Titanium (Ti), 316 Stainless Steel (SS316), and TCR Modes
  • Temperature Range : 200 - 600F
  • Resistance Range : 0.1 - 3.5ohm in Wattage / Bypass Mode
  • Resistance Range : 0.05 - 1.5ohm in Temperature Control Modes
  • Micro USB Charge Port
  • Firmware Upgradeable
  • Ventilation Holes for Heat Dissipation
  • Buttons Positioned on Bottom of Device
  • Short Circuit Protection
  • Atomizer Protection
  • Low Resistance Protection
  • Low Voltage Protection
  • Weak Battery Alert
  • Temperature Protection
  • Temperature Alert
Melo 3 Mini Features & Specs :
  • Dimensions : 2 3/4" x 7/8"
  • 22mm Diameter
  • 510 Threaded
  • 2ml e-Liquid Capacity
  • Invisible Airflow Control
  • Stainless Steel Construction
  • Glass Tank
  • Top-Fill
  • Uses EC Series Atomizer Heads
***Temperature Control Requires the use of Ni200, Ti or SS316 Coils.***

Package Contents :
  • 1 x iStick Pico 75W TC
  • 1 x Melo 3 Mini Tank
  • 1 x EC 0.3ohm Atomizer Head (Pre-Installed)
  • 1 x EC 0.5ohm Atomizer Head
  • 1 x Pack of Spare O-rings
  • 1 x Micro USB Cable
Sold Individually

30 day limited warranty against manufacturer defects. Scratches and discoloration to the finish, normal wear & tear, accidental damage etc... is not covered by warranty.

***The use of Nickel Ni200 or Titanium Ti coils should only be used on devices equipped with circuit boards capable of temperature control. The use of these coils on any other device could result in an explosion.***

This device should only be used with Lithium Ion IMR Batteries with an amp limit of 20A and higher. Using any other battery can be potentially dangerous.
Use special caution when working with any Li-ion cells as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the end user is very knowledgable of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended.
We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.
LiteCigUSA will not be held liable for any personal injury and/or damage temporary or permanent caused from the use of this product.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Mods & RDA's
Mods & RDA's > Variable Mods
Mods & RDA's > Temperature Control
New Arrivals
Starter Kits
Starter Kits > eLeaf iStick