eLeaf iStick 60W TC Starter Kit with Melo 2 Tank
eLeaf the manufacturer of the insanely popular iStick series, has rolled out another powerful and even more feature packed device with the iStick 60W TC. Building upon the popular iStick 40, the upgraded eLeaf iStick 60 TC not only delivers 60 watts of maximum output power, but it also comes with smart temperature control capability. The temperature control on the iStick 60 allows for the use of both Nickel (Ni200) and Titanium (Ti) coils.
The all new design of the iStick 60 TC leaves this device feeling great in the hand with its curve design. The iStick 60 TC requires (1) high amp 18650 battery (Sold Separately). Battery changes are a snap with the magnetic battery cover. The Eleaf iStick 60 also features the ability to swap out the magnetic covers (Sold Separately) which come in several different colors such as Blue, Teal, White and Grey to customize the device to your own style.
The eLeaf Melo 2 Tank features a 4.5ml liquid capacity, and is extremely easy to fill with its unique side fill port. With this all new filling design there is no need to take any parts off, or remove the tank to fill. The eLeaf Melo 2 Tank uses the highly efficient EC atomizer heads. The eLeaf Melo 2 has an easily adjustable air flow control for maximum vapor output. The included insulated driptip will keep things coil, even with plumes of moist and warm vapor.
With the use of the 100% pure cotton eLeaf EC TC-Ni or TC-Ti atomizer heads, the iStick 60 TC offers a superb vape with its temperature control capabilities.
Features & Specs of iStick 60 TC:
Features & Specs of Melo 2 Tank :
- Dimensions : 3 1/2"L x 1 1/2"W x 1 1/8"D
- 510 Spring loaded connection
- 18650 battery can be charged with the built-in Micro USB port. (Micro USB cable included)
- Uses 1 x high drain 18650 battery (Sold Separately)
- Operating Wattage : 1W to 60W
- Resistance : 0.15 - 3.5ohm in Wattage mode, and 0.05 - 1.0ohm in Temperature Control Mode
- Temperature Control : Ni200 Nickel and Ti Titanium modes
- Temperature Control : 100-315C / 200-600F
- OLED Display
- Output Voltage Display
- Output Wattage Display
- Resistance Output Display
- Output Temperature Display
- Battery Status Indicator Display
- Low Voltage Protection
- Temperature Alert
- Temperature Protection
- Short Circuit Protection
***Temperature control requires the use of Nickel or Titanium Coils***
- Dimensions : 2 1/2"L x 7/8"D
- 22mm Diameter
- 510 Threaded
- 4.5ml Liquid Capacity
- Glass Tank
- Adjustable Airflow
- Unique and convenient side fill port
- 100% pure cotton atomizer heads
- Uses eLeaf EC, EC-TC Nickel, and EC-TC Titanium Atomizer Heads
- Delrin insulated Driptip
Package Contents :
- 1 x iStick 60 TC
- 1 x Melo 2 Tank
- 1 x EC 0.3ohm atomizer head (Pre-installed)
- 1 x EC TC-Ni 0.15ohm Atomizer Head
- 1 x EC TC-Ti 0.5ohm Atomizer Head
- 1 x Packet of spare o-rings
- 1 x Micro USB Cable
- 1 x Instruction Manual
30 day Limited Warranty against manufacturer defects. Scratches, Discoloration of the finish is considered normal wear & tear is not covered by warranty.
Please note this item can use subohm coils, and subohm builds. It will only work when using such resistances on a mechanical mod, or variable wattage mod capable of firing a resistance of 0.15ohm.
Before using you need to make sure you mod/ and or batteries can handle the resistance load. Always make sure to consult ohms law, and other important materials to ensure a safe & fun vaping experience!
***The use of Nickel Ni200 or Titanium Ti coils should only be used on devices equipped with circuit boards capable of temperature control. The use of these coils on any other device could result in an explosion.***
LiteCigUSA will not be held liable for any personal injury and/or damage caused to unit it is used on.
LiteCigUSA will not be held liable for any personal injury and/or damage temporary or permanent caused from the use of this product.