Wismec Presa 75 Watt Temperature Control Mod
The Presa from Wismec takes ergonomics, power, and ease of use to an all new level. The Presa 75 from Wismec gets its' name from its unique firing button. The Wismec Presa Mod uses a single 18650 High Amp battery (Sold Separately), and is capable of 75 watts of output power. The magnetic battery door allows for easy battery swaps, or you can recharge the Presa using the Micro USB Port. The Presa 75w features temperature control modes for Ni200 Nickel, Ti Titanium and SS Stainless Steel. The Presa Box Mod can also be used in Variable Wattage Mode, or the new Bypass Mode. The ability to upgrade the firmware for the Presa 75 watt chipset will keep this sleek mod a true go-to device.
Features & Specs :
Firmware Upgrades :
- Spring Loaded 510 Connection
- Stainless Steel Threads
- Unique Firing Design
- Temperature Control, Variable Wattage and Bypass Modes
- Supports Ni200 Nickel,Ti Titanium and SS Stainless Steel Wires in TC mode
- Output Power : 1 - 75W
- Resistance Range (TC Mode) : 0.05 - 1.0ohm
- Resistance Range (Power / Bypass Mode) : 0.1 - 3.5ohm
- Temperature Range : 200 - 600F
- Uses 1 x 18650 High Drain Battery (Sold Separately)
- Magnetic Battery Cover
- 0.96" OLED Display
- Short Circuit Protection
- Reverse Polarity Protection
- Temperature Protection
- Low Voltage Protection
- Micro USB Port
- Upgradeable Firmware
***Temperature Control requires the use of Nickel, Titanium or Stainless Steel coils.***
Package Contents :
- 1 x Wismec Persa 75W TC Mod
- 1 x Micro USB Cable
- 1 x instruction Manual
30 day Limited Warranty against manufacturer defects. Scratches, Discoloration of the finish is considered normal wear & tear is not covered by warranty.
We highly recommend using an external charger to charge the 18650 batteries you will use in thePresa 75. The USB port is not covered under the manufacturer's limited warranty, and if loosened from frequent charging, you may lose the ability to update the device, as well as complete USB charging function.
Please use special care when working with or handling Li-ion cells. They are very sensitive to charging characteristics, and may explode or burn if miss handled. Always charge in or on a fireproof surface, and never leave charging batteries unattended. We are not responsible for any damage caused from the use of Li-ion batteries and chargers. This device should only be used with rechargeable Lithium Ion IMR batteries with an amp limit of 20A and higher.
LiteCigUSA will not be held liable or responsible for any injury, damage or defect permanent or temporary that may be caused from the use of a Li-ion battery. Please have a basic understanding of the batteries you are using and how to properly care for them.