Home > Accessories >

  Sweet Spot Vapors Ti-X Wire - 0.6mm

Alternative Views:

Price: $13.95

Stock Status: In Stock
Availability:: Usually Ships in 24 to 72 Hours


Ti-X Wire by Sweet Spot Vapors

Ti-X is a "hybrid" Titanium alloy (91% Titanium) resistance wire. Ti-X does NOT appreciably climb in resistance, with heat. This mimics the performance characteristics of a "traditional" Kanthal or NiCr heating element. Ti-X still contains NO Nickel, Chromium and minimal Iron content. Ti-X is tailored specifically for VV/VW and mechanical mods.

The X stands for "extreme". We recognize a market for "cloud chasing" and more traditional wire characteristics. Ti-X can be approached (build wise) like Kanthal A-1 or NiCr resistance wires. The total heat output is dependent on power applied, since the resistance is relatively fixed across the elements heating "window".

Ti-X is produced with our same attention to detail, and undergoes our multi-stage vacuum annealing process, as well as our Ultra-Sonic / Steam cleaning method. Ti-X is a VERY "stiff/springy" material. This aids in it's durability, and ability to hold shape over extreme heats and durations of time. We highly recommend using a "coil jig" to wind/form Ti-X.

As with our Ti-Wire (pure Titanium wires), we DO NOT recommend dry burning/firing Ti-X for extended durations of time. Ti-X is still VERY fast (compared to Kanthal A-1) and will exceed it's maximum temperature (and fail) in a prolonged "dry fire" situation. As with our Ti-Wire product line, Ti-X will not form any oxides or deposits (at vaping temperatures) and does not required high heat to clean (just scrub under warm water, as with our Ti-Wire).

0.6mm Ti-X is approximately 1.8 ohms per foot, at 27 deg C.

Package Contents:
  • 1 x 20' roll of 0.6mm Ti-X Wire
  • 1 x Muji Japanese Cotton Pad

Sold Individually

This product is not covered by warranty and can not be returned or exchanged.

Ti Wire from Sweet Spot Vapors should only be used on devices that are capable of using Titanium Temperature Sensing coils. Using Titanium wire in any other device could cause an explosion.
LiteCigUSA will not be held liable for any damage temporary or permanent due to the use of this product. Please always test you coils before, and be knowledgable about what you are working with.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Accessories > Rebuildable Supplies
New Arrivals