Home > Mods & RDA's >

  Joye Cuboid 150W TC Mod - Black



 
Alternative Views:


Joye Cuboid 150 Watt Dual 18650 Temp Control Mod - Black
Price: $54.95
Sale Price: $42.95
You save $12.00!

Stock Status: In Stock
Availability:: Usually Ships in 24 to 48 Hours
Product Code: JOYE-CUBOID-BLACK
Qty:

Description
 

Joye Cuboid 150W Dual 18650 Temp Control Mod

The Cuboid from Joyetech is an incredibly small dual 18650 Temp Control Mod. The Joyetech Cuboid uses the Variable Temperature Control System with the V3.0 firmware pre-installed with 150 Watt output and compatibility for Nickel, Titanium and 316 Stainless Steel in TC Mode. They have also added a Customizable TCR for the TC mode as well.

The Joye Cuboid features stainless steel 510 threading, and a wide border design to accommodate larger tank sizes. The Joyetech Cuboid is powered by two replaceable and removable 18650 batteries. (Sold Separately) The dual 18650 batteries are easily swapped with the new slip-open battery door. With the Cuboid comes a very nice 0.96" OLED display, multiple color options, and the all new dual battery bar display. The upgradeable firmware ensures your Cuboid is always update to date.

The Cuboid from Joyetech allows you to now adjust TCR values for different materials, which further improves on the accuracy of the built-in temperature control. There are three available options for the TCR mode (M1, M2, M3). In the power-off state, press the fire and right button simultaneously for 5 seconds to enter the TCR setup menu.

Firmware 3.10 for the Joyetech Cuboid is now available and allows you to upgrade to 200W.
Features & Specs :
  • Dimensions : 3 5/8" x 1 5/8" x 1 1/8"
  • Stainless Steel 510 Threading
  • Output Wattage : 1 - 150W
  • Temperature Control : Nickel, Titanium, 316 Stainless Steel & TCR Mode
  • Temperature Control Range : 200 - 600F
  • Resistance Range for Variable Temperature Mode : 0.05 - 1.5ohm
  • Resistance Range for Variable Wattage Mode : 0.1 - 3.5ohm
  • Upgradeable Firmware
  • 0.96" OLED Display
  • Dual Battery Display Bar
  • Requires 2 x 18650 High Amp Batteries (Sold Separately)
  • Slip Open Battery Cover for Easy Battery Swaps
  • Micro USB Port for Charging and Firmware Upgrades
  • Reverse Polarity Protection
***External charger is suggested for optimal charging of batteries.***

***Temperature Control requires the use of Nickel, Titanium or Stainless Steel Wires/Coils.***

Package Contents :
  • 1 x Joye Cuboid 150W Temperature Control Mod
  • 1 x Micro USB Cable
  • 1 x User Manual
Sold Individually

30 day limited warranty against manufacturer defects. Scratches and discoloration to the finish, normal wear & tear, accidental damage etc... is not covered by warranty.

***The use of Nickel Ni200 or Titanium Ti coils should only be used on devices equipped with circuit boards capable of temperature control. The use of these coils on any other device could result in an explosion.***

This device should only be used with Lithium Ion IMR Batteries with an amp limit of 20A and higher. Using any other battery can be potentially dangerous.
Use special caution when working with any Li-ion cells as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the end user is very knowledgable of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended.
We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.
LiteCigUSA will not be held liable for any personal injury and/or damage temporary or permanent caused from the use of this product.


  0 of 1 people found the following review helpful:
 
Joye Cuboid 150W TC April 4, 2016
Reviewer: Maggie from NY United States  
I ordered the Cuboid 150W TC as a gift for a friends Birthday.
I'm sure she likes it.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
Great Service, Fast Shipping, Great Mod February 21, 2016
Reviewer: Steven Fletcher from Williamsburg, VA United States  
I bought some coils and made a mistake in the address I gave. When I contacted them, litecigusa agreed to give credit on the package if it came back to them. It did, eventually, and they let me know I had some credit. I used it to buy a black Cuboid (no longer needed the coils), an excellent device I am completely happy with: it feels good in the hand and is easy to use. No cons, really! It's currently rocking a Starre Pro tank, which I also highly recommend.  PS. I had the unit in my hand two days after placing the order--thanks, litecigusa--see you next time!  PS. You can see these units being made if you watch PBusardo's YouTube video where he visits the Joyetech factories.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Almost Perfect, but 510 Issues February 18, 2016
Reviewer: Mark Smitka from PA United States  
I've got two eVic VTC mini's, and found some wobble with the 510 connections on those (depending on the length of the atty 510 post). Unfortunately, as nice as the Cuboid is, it seems to have issues with long(ish) 510 atty connectors. From a gap, to "no atomizer found", it's definitely a bit finicky. At the price point, it's still a steal, as long as you've got a variety of tanks or RDA's. A Vulcan style heat sink (with adjustable center pin) is a good easy fix.  Overall though, I love it.

Was this review helpful to you?


Browse for more products in the same category as this item:

Mods & RDA's
Mods & RDA's > Box Mods
Mods & RDA's > Temperature Control
Mods & RDA's > Variable Mods
New Arrivals