Home > Mods & RDA's >

  IPV D3 - 80W - White

Alternative Views:

IPV D3 80W TC Box Mod - White
Price: $59.95
Sale Price: $40.00
You save $19.95!

Stock Status: In Stock
Availability:: Usually Ships in 24 to 48 Hours
Product Code: IPV-D3-WHITE


IPV D3 80W Temperature Control 18650 Box Mod

From Pioneer4You is the latest in compact and portable vaping - IPV D3 80W Temp Control Box Mod. The IPV D3 includes all the features that made the IPV D2 so popular, but with more power and better capabilities. The Pioneer4You IPV D3 gives you the ability to use Temperature Control with both Nickel and Titanium wires. Even with being one of the smallest single 18650 battery mods available, the IPV D3 can still provide 80 watts of output power and fire an atomizer with a resistance as low as 0.15ohm. One of the new features on the IPV D3 is the voltage step down capability that allows for lower wattage vaping and better battery life. The IPV D3 features the all new YIHI SX150 Chipset. With 80 watts of vaping power, temperature control, easy battery swaps and even more the IPV D3 is the ultimate Box Mod for the vapor who is always on the go or just prefers a smaller mod!

Features & Specs :
  • Dimensions : 3" x 2" x 1"
  • 510 Threaded
  • Magnetic Battery Door
  • Temperature Control
  • Nickel and Titanium Wire Compatible in TC Mode
  • Step Down Function
  • YIHI SX150H Chipset
  • Output Wattage : 7 - 80W
  • Output Voltage : 1.0 - 7.0V (Supports Stepdown)
  • Output Joules : 10.0 - 75.0J
  • Standard Resistance : 0.15 - 3.0ohm
  • Temperature Control Resistance : 0.05 - 0.5ohm
  • Temperature : 212 - 572F
  • Can be charged using built-in Micro USB Port
  • Requires 1 x High Amp 18650 Battery (Sold Separately)
  • Low Voltage Protection
  • Low Resistance Protection
  • High Input Voltage Warning
  • Temperature Overheat Protection
  • Short Circuit Protection
  • Reverse Polarity Protection
  • OLED Display
***Temperature Control requires the use of Nickel or Titanium coils.***

Package Contents :
  • 1 x IPV D3 80W Temp Control Mod
  • 1 x Micro USB Cable
Sold Individually

30 day limited warranty against manufacturer defects. Scratches and discoloration to the finish, normal wear & tear, accidental damage etc... is not covered by warranty.

***The use of Nickel Ni200 or Titanium Ti coils should only be used on devices equipped with circuit boards capable of temperature control. The use of these coils on any other device could result in an explosion.***

This device should only be used with Lithium Ion IMR Batteries with an amp limit of 20A and higher. Using any other battery can be potentially dangerous.
Use special caution when working with any Li-ion cells as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the end user is very knowledgable of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended.
We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.
LiteCigUSA will not be held liable for any personal injury and/or damage temporary or permanent caused from the use of this product.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Mods & RDA's
Mods & RDA's > Box Mods
Mods & RDA's > Temperature Control
Mods & RDA's > Variable Mods
New Arrivals