Home > Rebuildable Atomizers > IGO-W Series >

  IGO-W Rebuildable Dripping Atomizer

Alternative Views:

Our Price: $14.95
Sale Price: $11.95
You save $3.00!

Stock Status:In Stock
Availability:: Usually Ships in 24 to 72 Hours
Product Code: IGO-W-DRIP-ATOM

IGO-W Rebuildable Dripping Atomizer

The IGO-W is a 510 threaded Rebuildable Dripping Atomizer. The 510 threading allows the use of this atomizer on most ecigs with a 510 or eGo thread connection.

The IGO-W has a sealed battery connector, and a stainless steel body and base.

The IGO-W features a three post setup and dual air intake holes. This makes the IGO-W the perfect dripper for multiple configurations from single coil, to dual coils.

Phillips head screws for connection on the positive/negative connection posts.

Rebuildable using Fiberglass, SS mesh or Silica rope and wire.

The IGO-W will work with most 510 style driptips.

The rebuildable dripping style atomizer is only for advanced users who can build their own wicks, and coils. If you are not comfortable with this, and or using a meter to ensure a proper coil we do not suggest purchasing this atomizer.

We will not be responsible for any damage to any equipment etc... from the use of this atomizer. Please use caution when building or using this product.

Due to the nature of this product we will only warranty it against manufacturer defect. Any damage from cross threading, thread damage, oring damage, and normal wear an tear is not covered.

  0 of 0 people found the following review helpful:
Posts and Deck December 20, 2013
Reviewer: Vapors Of Kaoz from Leominster, MA United States  
This is a good RBA, however the small deck makes it hard to build on and doesn't give much space for wicks. My biggest problem is the posts, the tread tolerances on the screws are bad and the wire feeding through the post is a nuisance and tends to break the wire. it is almost impossible to get an accurate reading with how much it shorts. but all and all good for it price and I won't stop using it any time soon.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Best for the money! December 8, 2013
Reviewer: David Ingels from Quincy, IL United States  
Thought I'd try this one since the price can't be bet for a dual coil/dual hole device. Since I got it, though, I haven't used anything else. I did drill the holes to 1/16". Built a dual-coil at 0.7 ohms and it's so good that I'm reluctant to take it off! Again, for the price, it's gonna be hard to beat this one.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Inexpensive dripper that rips December 4, 2013
Reviewer: Joe from The Mitten  
I built a quad microcoil setup at .3 ohms (14 A constant, running a 30 A 18650) and bored the holes out to 1/16". The only thing bad is I need to bore the holes up a size for the build that is in it haha. Works great and is easy to build, especially for the price!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Good little Rda December 4, 2013
Reviewer: Travis from Baton Rouge, LA United States  
The igo-w is built just well. The deck has a nice juice well. The only problem is the stock air holes are tiny. This thing is unusable without drilling out the air holes, at least for me. So as long as you have access to a drill this is a great buy.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
First rebuildable... December 1, 2013
Reviewer: Gary from Michigan  
Like the title says, this is my first rebuildable atomizer. I didn't want to commit a ton of money on my first, and this item has been a very pleasant surprise. It's simple to rebuild as I am using it in the single coil configuration, and is perfect for sampling new juices before committing a full tank or cartomizer.

I did modify the Igo-W by enlarging one of the air holes since it had a hard draw. Be advised that this item is stainless steel and is harder to drill than aluminum. You will need to start with a VERY small drill bit and gradually work your way up to the desired hole size.

I also applied a brushed finish to the barrel of the atomizer so it would match the finish on my stainless steel Sigelei V-max.

Overall, I am very pleased with the item and the fantastic service from LiteCigUSA.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Rebuildable Atomizers > IGO-W Series
Social Tab
Are you a fan of LITECIGUSA?
x hide this bar
About LiteCigUSA learn more »