Home > Mods & RDA's >


Alternative Views:

Price: $17.95
Sale Price: $5.00
You save $12.95!

Stock Status: In Stock
Availability:: Usually Ships in 24 to 72 Hours
Product Code: IGO-F-DRIP-ATOM



The IGO-F is a 510 threaded Rebuildable Dripping Atomizer. The IGO-F features a built in liquid tank. The tank can hold about 1ml of e-liquid.
To fill the tank, unscrew the hex screw from the bottom of the atomizer, fill with liquid, and reinstall hex screw.
The 510 threading allows the use of this atomizer on most ecigs with a 510 or eGo thread connection. The IGO-F dripping atomizer also comes with a eGo thread cover for seamless use on most eGo style batteries. Sealed battery connector, and a stainless steel body and base. Two phillips head screws for connection on the positive/negative connection posts.

Rebuildable using Fiberglass or Silica rope and wire.

The IGO-F top cap has an integrated driptip/ mouthpiece and this is not changeable with other driptips.

The rebuildable dripping style atomizer is only for advanced users who can build their own wicks, and coils. If you are not comfortable with this, and or using a meter to ensure a proper coil we do not suggest purchasing this atomizer.
We will not be responsible for any damage to any equipment etc... from the use of this atomizer. Please use caution when building or using this product.

Due to the nature of this product we will only warranty it against manufacturer defect. Any damage from cross threading, thread damage, oring damage, and normal wear an tear is not covered.

  0 of 0 people found the following review helpful:
i like it February 17, 2014
Reviewer: Sardonick from Jacksonville, FL United States  
I know I've seen several videos and posts where people hate this thing and call it the igo -fail but after a little fiddling, I have to say I like it. I can see why others don't and clearly it's not going to be my primary rba, but mine works well and is easy to rebuild.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Carbide drill bits January 5, 2014
Reviewer: Jakerock from Brooklyn, NY United States  
I love it now, but had to modify it.

Drilled air hole out to 1/8 inch, stock one is too small and too low.

Drilled out "wick holes" to 3/32 inch.

I have it set up as auto dripper with 3/2 wrap of .7 ribbon wire and small cotton wick (dont block wick hole with cotton)
Reservoir of juice feeds wick if tilted.

Small chambered RDA's like this are fantastic, but this one requires fairly substantial modification IMHO.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Igo f review September 17, 2013
Reviewer: Keat Fox from Tulsa, OK United States  
The igo f is a great beginners rda its small so it fits flush with an ego battery. Its not the most complex rda but is still good for everyday use if you want lots of smoke id recommend the igo-w its the triple post igo.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
IGO-F August 15, 2013
Reviewer: Nathan Jimenez from lakewood, CA United States  
this tank is great on my ego easy to use and not a hassle to be dripping all the time

Was this review helpful to you?

  2 of 2 people found the following review helpful:
What where they thinking July 30, 2013
Reviewer: Vappy Vapper from Las Cruces, NM United States  
I don't know what to make of this one. I love the looks finish and size: Its perfect for my Precise Simplicity.
Tricky assembly and Ohmmeters don't scare me.
However, according to the manufacturer You are supposed to thread the two ends of the wick through two holes leading to the small tank. The supplied wick is nigh impossible to thread through. Its too thick. I finally managed it by wrapping a bit of scotch tape around the ends. I prime the wick, fill the tank and let it sit for a moment.
The result: ugly dry burnt taste.
higher resistances: same results. There is just not enough liquid getting to the coil. The holes choke the wick that is supposed to pass through them.
using a thinner wick helped a bit. However, now half the tank would leak into the coil compartment as soon as you tip the unit.
I suppose with a perfectly fitting wick this rebuildable would work fine, but wouldn't you supply a sample of said perfectly fitting wick the unit?
So what where they thinking???

Was this review helpful to you?

Browse for more products in the same category as this item:

Mods & RDA's
Mods & RDA's > Rebuildable Atomizers